DT50™ Specifications

DT50™ 112 combo

  • Advanced HD modeling technology
  • Reinhold Bogner’s most flexible tube design
  • (2) 12AX7 preamp, (2) EL34 power amp (25W/50W)
  • Simple and straightforward 2-channel design
  • Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
  • Master volume
  • High and Low inputs
  • Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
  • Complete, one-touch analog reconfiguration (via Channel select switch)
  • Low-power mode
  • 1x12" Celestion® custom G12H90 speaker
  • L6 LINK™ in/thru connection for POD® HD integration
  • MIDI in and out
  • Serial effect loop with level control
  • Footswitch jack for channel switching
  • XLR direct out with cabinet simulation and ground lift switch
  • 4, 8 and 16-ohm speaker outs
  • DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

DT50™ 212 combo

  • Advanced HD modeling technology
  • Reinhold Bogner’s most flexible tube design
  • (2) 12AX7 preamp, (2) EL34 power amp (25W/50W)
  • Simple and straightforward 2-channel design
  • Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
  • Master volume
  • High and Low inputs
  • Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
  • Complete, one-touch analog reconfiguration (via Channel select switch)
  • Low-power mode
  • 1x12" Celestion® custom G12H90 speaker; 1x12" Celestion Vintage 30 speaker
  • MIDI in and out
  • L6 LINK™ in/thru connection for POD® HD integration
  • Footswitch jack for channel switching
  • Serial effect loop with level control
  • XLR direct out with cabinet simulation and ground lift switch
  • 4, 8 and 16-ohm speaker outs
  • DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

DT50™ head

  • Advanced HD modeling technology
  • Reinhold Bogner’s most flexible tube design
  • (2) 12AX7 preamp, (2) EL34 power amp (25W/50W)
  • Simple and straightforward 2-channel design
  • Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
  • Master volume
  • High and Low inputs
  • Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
  • Complete, one-touch analog reconfiguration (via Channel select switch)
  • Low-power mode
  • MIDI in and out
  • L6 LINK™ in/thru connection for POD® HD integration
  • Footswitch jack for channel switching
  • Serial effect loop with level control
  • XLR direct out with cabinet simulation and ground lift switch
  • 4, 8 and 16-ohm speaker outs
  • DT50/DT25 v2.0 firmware expands the HD preamp count from four to 30, lets you configure your own custom voicings, and more

DT50™ 412 cab

  • 2x12" Celestion® G12H90 speakers
  • 2x12" Celestion Vintage 30 speakers
  • 8-ohms
  • Straight front with slant baffle
  • Closed back
  • Constructed of 11-ply poplar
  • Solid, heavy-duty casters
  • Recessed handles