Über Metal™ brings you massive amounts of gain in one tiny, tough package. You can chose from some of the best Line 6 high-gain tones from HD147® and Vetta II™ including Metal, Pulverize, and Insane. Also included with the Über Metal is a built-in selectable noise gate, and scoop control for massive tonal contouring.





Model Switch - Give this a flick to reconfigure the destructive power of Über Metal.
    Metal - creates screaming distortion, from heavy grind to molten metal! Bow down, infidels.

    Pulverize - gives you a distortion similar to a high-gain tube amp. Mmmm, it's warm and meaty!

    Insane - has more skin-peeling gain and sustain than anything else available. For the inner Samurai-shredder in all of us.
Level - This sets the output level. Higher levels will hit the amp or effect fed by the Über Metal will more signal level, giving your more volume.

Mid & Scoop - Mid chooses a frequency from 250Hz to 4kHz. Scoop then removes sound at this frequency, with maximum scoop at the fully clockwise setting. Turn it fully counter-clockwise for a slight mid boost.

Drive - This controls the amount of distortion created within your Über Metal. Especially when you've got it set high, you may need to use the Gate to tame unwanted noise.

Bass & Treble - Bass and Treble are controls for your low and high frequencies.

Gate
    Off - Disables the Gate.

    Gate 1 - A soft and mild noise gate, self-adjusting to your current Drive knob setting.

    Gate 2 - A heavy, fast-clamping gate. Great for those aggressive metal chords and palm muting.
©2006 Line 6, Inc. All Rights Reserved. Line 6®, ToneCore®, Über Metal™, HD147?, and Vetta™ are trademarks of Line 6, Inc.



Metal
Pulz
Insane


Download User's Manual
Interactive Demo
Video Demo




Über Metal is also available as a ToneCore module.
Click here to learn more!


Power Requirements
- Single 9-Volt Battery, or
- Line 6 DC-1G 9-Volt DC Power Supply (buy it now)

Size & Weight:
- Width 3.375"
- Depth 5.625"
- Height 2.875"
- Weight 2lbs 4oz